Soil Ph Meter Tester EC Meter for Soil PH TDS CF Sunlight Moisture Humidity Garden Temp Soil moisture Sensor Gauge Optional
PH
$24.33
Angebotspreis
$24.33
Normaler Preis
$0.00
Zu Produktinformationen springen
Soil Ph Meter Tester EC Meter for Soil PH TDS CF Sunlight Moisture Humidity Garden Temp Soil moisture Sensor Gauge Optional
$24.33
Angebotspreis
$24.33
Normaler Preis
$0.00
Versandkosten werden beim Checkout berechnet.
SPECIFICATIONS
Battery Included: No
Brand Name: JUANJUAN
Certification: CE
Choice: yes
Display Type: DIGITAL
High-concerned chemical: None
Is Smart Device: No
Model Number: PH Meter
Origin: Mainland China
With Backlight Or Not: Yes
Soil Ph Meter Tester EC Meter for Soil PH TDS CF Sunlight Moisture Humidity Garden Temp Soil moisture Sensor Gauge Optional 48%off
1. EC-316 is a new high-precision EC tester, which can be used to measure soil EC and check the condition of the soil. With automatic temperature compensation function, it is less affected by ambient temperature. Widely used, suitable for aquariums, swimming pools, laboratory soils, hydroponics, food processing and animal husbandry.
2. Too high or too low soil EC will hinder the growth of crops, different plants have different suitable soil EC according to the characteristics of fertilizer demand and growth stage
Specification:
Measuring range: 0-4.00 mS/cm
Resolution: 0.01 mS/cm
Accuracy: ±2%FS
Display: 4-diqital LCD
Environment: Humidity: <95%
Automatic Temperature Compensation: 0℃~50℃
Power Supply: 4x1.5V (AG13)(not included)
Operating Temperature: 0℃~50℃
Dimensions: 245mm ×22mm×20mm
Weight: 75g
EC-315 is a new type of multi-purpose high-precision waterproof EC and temperature tester, which can be used to measure soil EC and temperature, and check the condition of the measured soil. With automatic temperature compensation, it is less affected by ambient temperature. Widely used, suitable for Aquarium, swim aming pol, laboratory soil, hydroponics, food processing imal husbandry.
Specification:
Measuring range:
EC: 0~4.00mS/cm
Temp: 0℃~50℃(32°F~122°F)
Resolution:
EC: 0.01mS/cm
Temp: 0.1℃
Accuracy:
EC: ±2%F.S
Temp: ±1C (±2°F)
Automatic Temperature Compensation: 0℃~50℃
Power Supply: 4x1.5V (AG13) (not included)
Operating Temperature: 0℃~50℃
Calibration: Manual, at one point through trimmer
Dimensions: 290mm ×35mm×35mm
Weight: 109g
& 
EC-8801/EC-8801B soil EC tester, CE certification, quality guaranteed. Large-screen LCD display, plug and play, clear and quick measurement data. Automatic temperature compensation, accurate data, measurable EC (0.00-10.00ms/cm), widely used in greenhouse planting, gardening planting, farmland planting, laboratory, agriculture, pot planting, etc.
Specification:
1. Product model: EC-8801/EC-8801A/EC-8801B/EC-8801BB
2. Product name: Soil EC/Temperature Tester
3.EC measuring range: 0.00-10.00ms/cm
4. Range of automatic temperature compensation: -30℃~80℃
5.Temp measuring range: -30°C-80.0°C, -220°F-176°F
6.Resolution：0.01ms/cm,0.1℃ /0.1℉
7.Accuracy:EC:±2%F.S. ，Temp:±5℃
8. Data retention H
9. Backlight display
10.°C/°F temperature switch
11. Low battery alarm
12. IP67 waterproof
Feature:
1. Plug and play, convenient and quick to use.
2. Large-screen LCD display, high-definition display color screen display, more comfortable experience, large viewing angle.
3. High-quality detachable probe electrode: replaceable, more convenient for maintenance, rust-resistant, corrosion-resistant, and suitable for various soils.
4. Lock button: After the value is stable, click the hold button to lock the current value. If you need to re-measure, please press the hold button again.
5. Product size: 37mm *37mm * 280cm
6. Battery: 3*1.5V button battery(not included), long life of power supply battery.
EC-3185 ,3 in 1 EC / TDS / CF soil tester is suitable for all kinds of soil gardening plants, using high-quality probes, rust and corrosion resistance. Too high or low soil organic carbon content will hinder the growth of plants. Different fertilizers will produce different soil ECs according to the characteristics of the fertilizer and the different growth stages. The TDS value indicates contact with total soluble solids in water. The lower the tds value, the solubility of heavy metal ions in water. Nutrient solution is the key to cultivation, and different crops require different nutrient solution formulas. EC-3185 can measure well and help you solve this problem.
Specification:
1. Measuring range:
EC: 0.00~4.00mS/cm
CF:0.0~4.00CF
TDS: 10~4000ppm
2. Resolution:
EC: 0.01mS/cm
CF: 0.01CF
TDS: 10ppm
3. Accuracy:EC: ±2%F.S
4. Automatic Temperature Compensation: 0~50℃
5. Power Supply: 4 * 1.5V (AG13) (not included)
6. Operating Temperature: 0~50℃
7. Calibration: Manual, at one point through trimmer
8. Dimensions: 170mm 35mm 35mm
9. Weight: 100g
Feature:
Perfect tool to test the soil conditions ( Moisture ) of fruits, flowers, vegetables, shrubs, etc.
Ideal and necessary tool for gardeners, vegetable and fruit growers, and all those who plant trees and grass
With high accuracy and easy operation. You can take good care of your plants.
Take the guess work out of your daily garden watering light and moisture.
Save water, energy and keep your plants, lawn, flower in top condition.
Measures moisture at root level.
No battery required, simple and convenient to use.
Simply insert the meter into the soil, switch to the setting you want to measure and read the scale.
Moisture:
1-3 Dry(red zone)
4-7 Moist(green zone)
8-10 Wet (blue zone)
This product only tests soil ,etcfor dry flour,smallstones,there are building blacks,sawdust,etc.notapplicable
How to use:
Step 1 : Stick the probe into the soil about 2-4 inches
Step 2 : Adjust the position of the probe until the pointer on the dial swing slightly
Step 3 : After 10 minutes, Note moisture level in the dial
Step 4 : Remove probe from soil and wipe clean after each use
Soil PH value plays a very important role in the growth process has grain crops, most crops in high pH soils is very difficult to survive, and therefore suitable PH value of planting the best crops vital:
1, with two-thirds into the soil when the soil compaction ,, ,, not too dry.
2, when the first use of a few first inserted in the soil, remove the oxide layer on the probe.
3, press the button next to the white display is ,, water
Use: measurement of different soil PH value and moisture.
Measuring range:
PH (acidity): 3-8
Humidity: 10-80%
Resolution: 0.2PH
Accuracy: ± 0.2PH (applies to arable land and classroom experiments)
Working temperature: 5-50 C (Fahrenheit 41-122 F)
Calibration: Gently wipe to remove oxides on the metal electrode
Instructions
1, remove the debris in the soil to be tested, such as topsoil, weeds, gravel, etc., if the soil is too dry or contain too much fertilizer, you need to spray some water for approximately 25-30 minutes before testing.
2, prior to testing with a damp cloth to thoroughly clean the surface of the metal electrode.
The first time you use the detector, the first electrode is inserted in the soil several times to remove surface oil so as not to affect the accuracy of PH value or humidity.
3, the detector vertically into the soil to be tested to ensure that the electrode and the surrounding soil is completely fit. After about 10 minutes, the detector will display the correct PH value and moisture.
Detector sometimes display different values, depending on the soil conditions, detector metal surface adhesion, humidity, etc. Therefore, it may take the average of several measurements as well.
4, press the meter on the side of the white or green button, the instrument will display soil moisture.
5, the detector after use, clean the electrodes with water after dry collection.
WARNING:
1, prior to testing to loosen the soil, be careful not to use too much force to insert excellent soil.
2. Do not insert metal part detector into the soil for too long (not more than 1 hour), to prevent electrode damage.
3, pre-test to keep the metal surface is clean and dry.
4, it can not be used to detect liquid, once the original liquid into contact with the electrical systems, fault detector occurs not covered by the warranty.
5. Do not try to take the opening tip, if you can loose tighten clockwise.
6, prohibit the use of the detector in the vicinity of magnetic objects.
7, prohibit hand holding electrode finger grease composition containing weaken current.
Note : this product without battery
Specification:
Soil pH, also known as "soil reaction." It is the soil solution of the acid-base reaction.
Mainly depends on the concentration of hydrogen ions in the soil solution at pH values. pH of
the solution is equal to 7 neutral solution; pH of less than 7, the acid reaction; pH value greater
than 7 is alkaline reaction. Soil pH can generally be divided into the following levels:
pH of soil pH
<4.5 strong acidic
4.5-5.5 strongly acidic
5.5-6.5 Acid
6.5-7.5 neutral
7.5-8.5 Alkaline
8.5-9.5 strongly alkaline
> 9.5 strong alkaline
Soil pH on soil fertility and a great influence on plant growth, China\'s northwest, north many
soil pH value, pH value of small red soil. Therefore can be grown and adapted to soil pH and
plant crops. Such as acid red soil area planted hi tea, and strong alkali such as alfalfa. Soil pH
effects on nutrient availability is also great, such as neutral soil phosphorus availability large;
alkaline soil trace elements (manganese, copper, zinc, etc.) effectiveness is poor. In agricultural
production should be noted that the pH of the soil, and actively take measures to adjust.
Specification:
Moisture Range: 1-10 (1-3 Dry, 4-7 Nor, 8-10 Wet).
Relative Light: 0-2000 lux (0-200 Low, 200-500 Low+, 500-1000 Nor, 1000-2000 Hgh).
pH Range: 3.5-8 pH (3.5-6.5 Acid, 7-8 Alkaline).
Color: Green
How to use:
Step 1: toggle switch to moisture/ pH/ light position.
Step 2: Stick the probe into the soil about 2-4 inches.
Step 3: Adjust the position of the probe until the pointer on the dial swing slightly.
Step 4: After 10 minutes, read the moisture/pH/light level in the dial.
Step 5: Remove probe from soil and wipe clean after each use.
Note:
1. Do not insert into very hard soil or touch hard objects when you insert it in the soil.
2. Do not use it to test pure water or other liquid, electrolytic response index will be affected, it can only be used to measure the soil.
3. Please wipe and clean the probe after each use.
Ideal and necessary tool for gardeners, vegetable and fruit growers, and all those who plant trees and grass
You can take good care of your plants.
For outdoor & indoor plants, gardens & grass lawn.
Simply insert the meter into the soil, switch to the setting you want to measure and read the scale.
To avoid damaging the electrode, please clean the electrode after each use, do not use in soil with stones and insert forcibly.
Feature:
Metric to British system conversion for temperature
Notice function for low power status
Easy to operate, light weight and portable to carry
Automatic off function for energy saving, the unit will be automatically off after 5 minutes disabling.
Specification:
Temperature measuring range: -9~+50(16~122), (accuracy: 1/1)
PH measuring range: 3.5-9.0
Working Temperature: +5~+40
Color: Yellow + Black
Main Unit Size: Approx.122*63*36mm(L*W*H)
Test Probe Size: Approx.5*200mm(D*L)
Note:
power supply: One 9V block batteries(not included)
Specification:
Product Name: Soil Tester
Type: 5-in-1 soil tester
Product size: 77*77*33mm/290mm
Working temperature: +5degC~+40degC
Power supply: 9V battery
Weight: 160G
Feature:
Large screen digital display interface
Long enough aluminum probe to adapt to multiple soil environments
Convenient temperature metric conversion function
Low power prompt function
Power-saving automatic shutdown function: automatic shutdown for 5 minutes without any operation
1. Measure the light intensity of the current environment:
LOW-.LOW.LOW+.NOR-.NOR.NOR+.
HGH-.HGH.HGH+
2. Measure the moisture content of the soil:
DRY+.DRY.NOR.WET.WET+
3. Measure the temperature of the soil, the temperature measurement range:
-9~+50degC (16~122degF), accuracy: 1degC/1degF
4. Measure the pH of the soil, PH range: 3.5-9.0
5. Measure the humidity of the soil environment, the percentage content of TEMP
Note:
1. Do not immerse the main part of the product in mud or water;
2. The main part of the product is not water or rain;
