6.5 Inch HiFi Subwoofer 320W Car Audio Music Stereo Sensitivity 87dB Woofer Speaker Damp-proof Car Audio Horn, Fits most car, boat, motorcycle or RV audio systems.

Feature:

Powerful & Deep Bass:
Engineered with a peak power of 320W and a continuous RMS rating of 80W, this 6.5-inch subwoofer delivers punchy, distortion-free low frequencies. It reproduces bass notes as low as 40Hz, adding depth and realism to your music.

Wide Frequency Range:
Unlike standard subwoofers limited to low-end response, this speaker covers a full frequency range from 40Hz to 20KHz. It acts as both a subwoofer and a mid-range driver, making it ideal for compact systems where space is limited.

High Sensitivity & Durability:
With an 87dB sensitivity, it efficiently converts power into sound, ensuring loud and clear audio even with entry-level amplifiers. The robust construction ensures long-lasting performance.

Easy Installation (Shallow Mount):
Designed to fit in tight spaces, its 6.5-inch frame allows for flexible installation in factory locations, custom enclosures, or under seats.

Wide Compatibility:
Perfect for replacing factory speakers or building a custom car audio system. Works seamlessly with a variety of head units and amplifiers.

Parameters:

Voltage: 12V~24V
Speakers Types: Bass speaker
Color: Black
Applicable mdels: Universal Car, Truck, Bus, etc
Material: Plastic + Metal + Rubber + Magnetic
Max. Power: 320W
Rated power: 80W
Impedance: 4Ω
Audio Sensitivity: 87dB
Frequency range: 45Hz-20KHz
Signal to noise ratio: Less than 1%
Special Features: Damp-proof and High Sensitivity
Model Number: Car Audio Music Stereo
Size: 6.5 inch

Installation Instructions

To protect the vehicle, cover it with a dust cloth.

Pry the door, unscrew the screws inside and around the door panel, and force outward from the bottom of the door panel to remove the door.

Remove the original car horn first fix the gasket on the original car horn.

1. To protect the vehicle, add a dust cloth to the vehicle
2. Remove the door panel (trim panel)
3. Remove the original car speaker
4. Fix the speaker bracket
5. Fix the speaker crossover
6. Connect the speaker terminals
7. Fix the speaker to the bracket
8. Connect the cross connection to the speaker wiring
9. Remove the original car speaker and replace the speaker
10. The reset and replacement of the door panel is completed

Attention:

1. Before buying, please confirm installation size, ensure the length and height of machine panel is suitable for your car.

2.Before installation, please carefully check the car horn lines, if grounding, please reconnect the lines before linking our machine, otherwise it may burn the machine.

3.The actual power of the speaker itself is not very large, there will be murmurs and buzzing when the speaker is very loud.

4.There will be murmurs and buzzing when the reconfiguration process is not connected correctly.

5. If there is no power amplifier installed, the sound of the main unit is not good and the power is not good, there will be murmurs and buzzing when the speaker is loud.

6. Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures.

7. Please allow 1-2cm measuring deviation due to manual measurement.